The PollMaster® Polling Software is used to poll toll (AMA) records from a telephone switch to a file on your computer.

If you are searching for a way to eliminate your dependency on tape or your tape drive is failing then the PollMaster® Polling Software is your most cost effective solution.

 POLLMASTER^® for BISYNC is a software/hardware package developed for the purpose of allowing communication from telephone switches such as the Siemens Stromberg-Carlson, Northern Telecom, Cook Electric BMC and other switches that support the BISYNC protocol to a Personal Computer (PC or Compatible) for the purpose of collecting AMA records.

·   The POLLMASTER^® for BISYNC package consists of:

o  One Communications Controller Card, cable and device drivers to support the BISYNC protocol.

o  One PMASTERB.EXE software program

o  Modems are purchased as needed and are separate from the PollMaster^® BISYNC package.

·   The PMASTERB.EXE program runs on a Personal Computer that is capable of running 2000\XP. Only prerequisite is the case must be bigger than a compact desktop for the card to be installed.

The following shows the physical hardware arrangement for the POLLMASTER^® for BISYNC and related equipment:

·   The card is directly connected to the modem through an industry-standard RS232 25 conductor cable.

·   A single port card supports speeds up to 56kps or the limiting speed of the modem.

Other PollMaster ^® BISYNC features

·        Polls multiple brands of telephone switches

·        Stores the file in a BCD format (binary)

·        Command line options for automation purposes

·        Creates a monthly log file of polling history

·        Prints out polling summary information after each job

·        Correctly displays block number on Bx.25 switches that are being polled using Bisync

·        Simple to use

·        Highly reliable

Copyright © 1998-2006 Utility Data Systems, Inc. All rights reserved.